Measurement, control and regulation of liquid and gas flows
As an authorized distributor of Bürkert Fluid Control Systems, BG electric offers direct deliveries from Germany and guarantees prices below factory prices. About 4000 valves are represented on this website, representing 15% of the Bürkert program. If the desired valve is not found here, send us a request.
Bürkert has a unique perspective in the process control and instrumentation industry as it is the only single brand which combines a complete range of valves, instruments, pneumatic actuation, networking and controllers from a single source. Bürkert has had 60 years to build the technical competencies which offer reliability, speed, and personal care into every system. Bürkert Fluid Control Systems is one of the world's leading manufacturers of measuring, control and regulating systems for fluids and gases. Bürkert products are used in a wide range of industries and applications – ranging from breweries and labs to medical, bio-engineering and aerospace technology. With a portfolio of more than 30,000 products Bürkert is the only supplier to offer all fluid control system components: from solenoid valves to process and analytical valves, as well as pneumatic actuators and sensors.
The 0290 valve is a servo-assisted 2/2 way solenoid valve of the S.EV series. The valve opens without differential pressure. The opening process is supported by the fixed coupling of the diaphragm to the plunger. In the process, the integrated 'soft-kick' function opens in a manner that is gentle on the material. Various diaphragm material combinations are available depending on the application. The range of housings is rounded off by stainless steel and cast iron versions. The solenoid coils are encapsulated with a chemically resistant epoxy. Body material is brass, stainless steel or cast iron. Seal material is FKM (fluoro rubber, 0...+120°C), EPDM (ethylene propylene rubber, -30...+120°C), NBR (nitrile butadiene rubber, -10...+80°C). The degree of protection is IP65. Total 340 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The 0330 valve is a direct-acting, media separated pivoted armature valve. It is available in 3/2- and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Stainless steel (316L), PVDF, and polypropylene housing versions complete the offering. The solenoid coils are moulded with a chemically resistant epoxy. The 0330 is equipped with manual override for commissioning and testing. Body material is brass, stainless steel or cast iron. Seal material is FKM (fluoro rubber, 0...+120°C), EPDM (ethylene propylene rubber, -30...+120°C), NBR (nitrile butadiene rubber, -10...+80°C). The degree of protection is IP65. Total 440 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65. The plug is not included and must be ordered separately. Body material is brass, stainless steel or cast iron. Seal material is FKM (fluoro rubber, 0...+120°C), EPDM (ethylene propylene rubber, -30...+120°C), NBR (nitrile butadiene rubber, -10...+80°C). The degree of protection is IP65. Total 106 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on the application. The standard brass body satisfies all European drinking water requirements. The body offering is completed with stainless steel and grey cast iron versions. The 3/2-way pilot valve can be easily converted from NC to NO circuit function by rotating it on the armature. The solenoid coils are moulded with a chemically resistant epoxy. Total 656 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The 6213 EV valve is a servo-assisted solenoid valve of the S.EV series. The spring coupling of the diaphragm supports the opening process of the valve. In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without differential pressure is available for gas and vacuum applications. Various diaphragm material combinations are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded off with a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X. Total 637 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The 6240 valve is a servo-assisted piston valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The housing design and surface quality enable maximum flow rates. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearings increases the life cycle with dry gases. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X. Total 210 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded out by a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. The valve can be equipped with manual override for easy maintenance and commissioning. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X. Total 1097 produced versions:To search for a part number, use ctrl + F expand / reduce table
|
The Type 6407 valve is a servo-assisted piston valve. The fix coupling between pilot valve and piston provides an opening of the valve without pressure difference. As a piston valve, the Type 6407 is particular suitable for media such as gas and steam. As well as liquids with low operating temperature below 0°C.The stopper and the core guide pipe are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics (double coil technology) are available. In combination with a plug acc. to DIN EN 175301-803 Form A, the valves satisfy IP65 degree of protection. Total 173 produced versions:To search for a part number, use ctrl + F expand / reduce table
|