Jump to page №
Multichannel regulators KS800 and KS816 will be discontinued from January 2020. In stock there are a number of KS800 and KS816 regulators of various designs.

A typical replacement alternative is the KSvario system, a new generation of multi-channel controllers with virtually identical functions in a modular design. KSvario offers the same features as well as a switch to Ethernet-based communications such as Profinet.

For stand-alone equipment, an alternative could be the freely programmable multi-function controller KS98-2, which can be used as a multi-channel controller with a built-in touch display.

Multiple temperature controllerKS800-RSKS800-DPKS800-CANKS800-DN

Multiple temperature controller
KS800-RS
KS800-DP
KS800-CAN
KS800-DN

Request quote
Made in Germany

The microprocessor-controlled KS 800 ensures precise, low-cost multi-loop control of temperature, and features an interface for bus or field-bus. Standard functions such as “set-point lowering” and “heating/cooling with four alarms” make the KS 800 ideally suited for temperature control of plastics processing machines, heated moulds, packaging machines, tempering units, and other similar thermal processes.

Furthermore, with high-power heating elements (e.g. in hot-runner moulds), the selectable functions “output hold ”in case of sensor break, and “start-up circuit ”ensure increased element life and prevent interruptions during Production. The self-tuning feature guarantees very short start-up times. For implementing continuous and split-range controllers, the KS 800 can be fitted with 8 additional analog control outputs.

ORDERING INFORMATION

  • KS 800-RS (RS 422/485), part number = 9407-480-00001
  • KS 800-DP (Profibus DP), part number = 9407-480-30001
  • KS 800-DP (Profibus DP), part number = 9407-480-50001, including terminals
  • KS 800-CAN (CANopen), part number = 9407-480-60001
  • KS 800-DN (DeviceNet), part number = 9407-480-70001

Multiple transmitter and temperature controllerKS816-RSKS816-DPKS816-CAN

Multiple transmitter and temperature controller
KS816-RS
KS816-DP
KS816-CAN

Request quote
Made in Germany

The microprocessor-controlled KS 816 ensures precise, low-cost multi-loop control of temperature, and features an interface for bus or field-bus. In addition, it can be used as a freely configurable field-bus transmitter with universal inputs for standard signals, thermocouples, and Pt 100 signals.

Standard functions such as „set-point lowering“ and „heating/cooling with four alarms“ make the KS 816 ideally suited for temperature control of plastics processing machines, heated moulds, packaging machines, tempering units, and other similar thermal processes. Furthermore, with high-power heating elements (e.g. in hot-runner moulds), the selectable functions „output hold“ in case of sensor break, and „start-up circuit“ ensure increased element life and prevent interruptions during production. The self-tuning feature guarantees very short start-up times.

The KS 816 does not have control outputs in the usual sense. Its output signals are made available on the field bus as% duty cycle and binary signals (on/off). For the control of heating elements, PMA provides remote power output modules that are also operated via a field bus.

ORDERING INFORMATION

  • KS 816-RS (RS 422/485), part number = 9407-481-00001
  • KS 816-DP (Profibus DP), part number = 9407-481-30001
  • KS 816-CAN (CANopen), part number = 9407-481-60001