Jump to page №

Laser distance sensors ASTECH

Laser distance measuring device LDM42E

Laser distance measuring deviceLDM42E

Laser distance measuring device

Request quote
Made in Germany

лого ethernet

LDM42E is an optoelectronic distance measuring device for industrial applications with an integrated Ethernet interface. It works contact-free on the principle of comparative phase measurement (amplitude modulation) and facilitates precisely accurate measurement of distances. Both, the LDM42E and the LDM42E distinguish themselves through high precision as well as high independence from the surface of the measuring object. The red, well visible laser beam allows for easy alignment. The LDM42E has been developed for fast distance measurements on white surfaces. Through the integrated Ethernet interface it is possible to retrieve the measured data in the network via Telnet protocol or to change parameters.

Measuring range 0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces
Measuring uncertainty ±2 mm under defined measuring conditions
±3 mm (+15 °C ... +30 °C)
±5 mm (-10 °C ... +50 °C)
Resolution 0,1 mm, freely scalable
Reproducibility 0,5 mm
Measuring time 0.24 s ... 6 s adjustable or automatically in mode DT
0.1 s in mode DW on white surface
20 ms in mode DX on white surface (only LDM42E)
Laser class Laser class 2 acc. to DIN EN 60825-1:2001-11 (650 nm, red)
Laser divergence 0,6 mrad
Operating temperature -10 °C ... +50 °C
Storage temperature -40 °C ... +70 °C
Supply voltage 10 V ... 30 V direct currents
Power consumption Ca. 3,5 W
Serial interface RS232 or optional RS422, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature of the device and error code
Switching output Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A
Housing material Aluminum anodized
Size (LxBxH) 187 mm x 96 mm x 50 mm
Weight 850 g
Protection class IP 65
Shock resistance 10 g / 6 ms (DIN ISO 9022-3-31-01-1)
MTBF 30,000 hours at 25 °C
Mounting 4 drill holes for M6 screws, 100 mm x 85 mm