Jump to page №

Activation current limiter ISMET

Activation current limiter. Gentle start-up for one-phase and three-phase electrical consumers.

High activation currents, e.g. for start-up of electric motors, can damage or interfere with the supply network and other connected consumers. Voltage-controlled activation current limiters prevent heavy choking of the mains voltage and overloading due to current peaks. The activation current limiter works with a pre-adjusted limiting resistor (NTC) which reduces the activation current so that the consumer starts up more slowly. After a defined time delay, the NTC of the activation current limiter is bypassed automatically and the full output is available. ISMET delivers activation current limiters in several designs for various application and installation variants.

ESB

Single-phase starting current limiters

ESB

Starting current limiters are voltage-controlled devices. Their functioning is based on a time-delayed bridging of the incorporated damping resistor which is set ex works. The time-lag is also set ex works for the ESB model (approx. 20 to 50 msec.). Available in cast plastic casing.

IR : 16 A,  UPRI : 110 - 400 V

Minimum Order Quantity = 10 pcs

ESB-S

Single-phase starting current limiters

ESB-S

Starting current limiters are voltage-controlled devices. Their functioning is based on a time-delayed bridging of the incorporated damping resistor which is set ex works. The time-lag is also set ex works for the ESB-S model (approx. 20 to 50 msec.). Available in plastic casing, can be snapped onto mounting rail TS 35.

IR : 16 A,  UPRI : 110 - 400 V

Minimum Order Quantity = 10 pcs

ESBN-S

Single-phase starting current limiters

ESBN-S

Starting current limiters are voltage-controlled devices. Their functioning is based on a time-delayed bridging of the incorporated damping resistor (NTC) which is set ex works. Plastic casing, can be snapped onto mounting rail TS 35.

IR : 25 A,  UPRI : 110 - 400 V

Minimum Order Quantity = 10 pcs

 

ESBG

Single-phase starting current limiters

ESBG

Single-phase starting current limiter as in-line device for electric consumers with high starting currents. Limiting resistor NTC. Plastic casing with incorporated grounding plug and grounding outlet.

IR : 16 A,  UPRI : 230 V

Minimum Order Quantity = 10 pcs

ESBG-S

Single-phase starting current limiters

ESBG-S

Single-phase starting current limiter as in-line device for electric consumers with high starting currents. Limiting resistor NTC, visual fault indicator (LED), thermal overload protection, incorporated in plastic casing, can be snapped onto mounting rail TS 35.

IR : 16 A,  UPRI : 230 V

Minimum Order Quantity = 10 pcs

ESBGT

Single-phase starting current limiters

ESBGT

Portable starting current limiter with 2-meter long mains cable with shock-proof plug. Output connection with shock-proof socket, max. 16 A. Number of switching actuations max. 1x/min. Primary connection 230 V, 50/60 Hz. Solid sheet-steel case with handle and rubber feet.

IR : 16 A,  UPRI : 230 V

Minimum Order Quantity = 10 pcs

 

ESBH

Single-phase starting current limiters

ESBH

Starting current limiters are voltage-controlled devices. Their functioning is based on a time-delayed bridging of the incorporated damping resistor which is set ex works. The time-lag is also set ex works for the ESB model (approx. 20 to 50 msec.). Available in cast plastic casing.

IR : 16 A,  UPRI : 110 - 400 V

Minimum Order Quantity = 10 pcs

ESBD-K

Three-phase starting current limiters

ESBD-K

Starting current limiters are voltage-controlled devices. Their functioning is based on a time-delayed bridging of the incorporated damping resistor which is set ex works. The time-lag is also set ex works for the ESBD-K model (approx. 20 to 50 msec.). Starting current limiter in plastic casing with snap fixation for mounting rail TS 35.

IR : 16 A,  UPRI : 400 - 500 V

Minimum Order Quantity = 10 pcs

----
Looking for the price? [x]
Copy & paste part number: