Jump to page №

Thyristor Power Controller TYA

Single-phase thyristor power controller JUMO TYA S201 70.9065

Single-phase thyristor power controller JUMO TYA S20170.9065

Single-phase thyristor power controller
JUMO TYA S201
70.9065

Single-phase thyristor power controller for burst-firing operation. The JUMO TYA S201 represents a cost-optimized version of the JUMO TYA 201 and is also used to control larger resistive and inductive loads. This is carried out using pulse group control. Areas of application include industrial furnace construction and plastics processing.

  • Load type: Resistive load, resistive inductive load; in the case of transformer loads, the nominal induction of 1.2 tesla must not be exceeded (value is 1.45 T in the case of mains overvoltage).
  • Load voltage: 230 V, 400 V, 460 V, 500 V
  • Load currents: 20 A, 32 A, 50 A, 100 A, 150 A, 200 A, 250 A
  • Approval: cULus
  • Special features: Soft start function, network load optimization through dual energy management, load monitoring for detection of partial load failure or load short circuit "Teach-In", integrated diagnosis system, device configuration without auxiliary voltage, LCD display with info line
  • Control voltage: Control voltage = load voltage
  • Operating modes: Phase-angle control, burst-firing operation; half-wave control; SSR logical operation; fast logical operation, alpha start; soft start
  • Ambient temperature: -20 to +70°C
  • System interfaces: RS422/485, PROFINET
  • Configuration: Setup/USB-powered; plain text display on the device

Stock models with short delivery times:

709065/8-01-020-100-400-00/252 709065/8-01-032-100-400-00/252
709065/8-01-050-100-400-00/252 709065/8-01-100-100-400-00/252
709065/8-01-100-010-400-00/252 709065/8-01-150-010-400-00/252
709065/8-01-200-100-400-00/252 709065/8-01-200-010-400-00/252
709065/8-01-250-100-400-00/252 -