✅ The PC350 is a S7 panel PLC with 3.5″ monitor and without peripherals.
You have to look twice: A small 3.5" touch panel and an S7 PLC built very compactly. The external peripherals are accessed via the many interfaces. Often used as an entry-level model or for additional display and operating devices in the S7 control network. In addition to the decent RAM (512/640kB), the interfaces Ethernet (S7 communication, TCP, UDP), Modbus (-TCP and -RTU, CAN (CANopen and Layer2), RS232 and RS485 (free ASCII) and optionally Profibus DP V0 (-master and -slave) favor the device for use as a data logger or gateway with data preprocessing.
- Standard configuration: RS232 with free ASCII-protocol
- RS485 with free ASCII protocol Modbus RTU
- Ethernet with- RFC1006 (S7-Connect-Put/Get), Comm via TCP/UDP, Modbus TCP
- CAN with- CANopen- layer2-communication
- Micro-SD slot for SD-cards up to 8 Gbyte
- Run/Stop switch
- Status LEDs for Power, Battery, Error, Run
- Inserting stripes for Logo and ident (customized adaption possible)
- Optional: Profibus DP Master- Profibus DP Slave
| - |
CPU type V → PC350V |
CPU type P → PC350P |
| Memory |
512 kB, 100 messages. |
640 kB, 100 messages. |
| Flash |
4 Mbyte + Micro SD. |
24 Mbyte + Micro SD. |
| Order number |
Designation |
| PC350V-0-03 |
3.5″ Panel PLC PC350V |
| PC350V-DPM-03 |
3.5″ Panel PLC PC350V Profibus Master |
| PC350V-DPS-03 |
3.5″ Panel PLC PC350V Profibus Slave |
| PC350P-0-03 |
3.5″ Panel PLC PC350P |
| PC350P-DPM-03 |
3.5″ Panel PLC PC350P Profibus Master |
| PC350P-DPS-03 |
3.5″ Panel PLC PC350P Profibus Slave |
|
