✅ The PC577 is a S7 panel PLC with 5.7″ monitor and modular onboard peripherals.
Workhorse, bread and butter control, performance miracle. No other INSEVIS panel PLC has been at home in so many series products for years as this module, which is only 95 mm deep and can accommodate up to 112 digital or 72 analog I/Os under the solidly manufactured rear panel. If that is not enough, there are enough interfaces for other external modules: Ethernet (S7 communication, TCP and UDP), Modbus (-TCP and -RTU), CAN (CANopen and Layer2) as well as RS232 and RS485 (free ASCII) and optionally Profibus DP V0 master and slave. Not bad for the size, right? Of course, optionally with customer logo. On the back or in the firmware.
- Standard configuration: RS232 with free ASCII-protocol
- RS485 with free ASCII protocol Modbus RTU
- Ethernet with- RFC1006 (S7-Connect-Put/Get), Comm via TCP/UDP, Modbus TCP
- CAN with- CANopen- layer2-communication
- Micro-SD slot for SD-cards up to 8 Gbyte
- Run/Stop switch
- Status LEDs for Power, Battery, Error, Run
- Inserting stripes for Logo and ident (customized adaption possible)
- Optional: Profibus DP Master- Profibus DP Slave
| - |
CPU type V → PC577V |
CPU type P → PC577P |
| Memory |
512 kB, 100 messages. |
640 kB, 100 messages. |
| Flash |
4 Mbyte + Micro SD. |
24 Mbyte + Micro SD. |
| Order number |
Designation |
| PC577V-0-03 |
5.7″ Panel PLC PC577V |
| PC577V-DPM-03 |
5.7″ Panel PLC PC577V Profibus Master |
| PC577V-DPS-03 |
5.7″ Panel PLC PC577V Profibus Slave |
| PC577P-0-03 |
5.7″ Panel PLC PC577P |
| PC577P-DPM-03 |
5.7″ Panel PLC PC577P Profibus Master |
| PC577P-DPS-03 |
5.7″ Panel PLC PC577P Profibus Slave |
|
